JL-712A3 light controller products are intelligent twist lock light controllers developed based on ZHAGA^® BOOK18 interface standard. lt adopts light sensing and microwave mobile combined sensor, which can output 0~10V dimming signal.

additionally, this is more significant features:

1-Rated Voltage: 12-24V DC power supply

2-anti false triggering design of interference light source, and turn off  the range  by reflected light compensation design of lamps

3-do you want specification conduct, then reading reference JL-712A3 Lighting Controller guide instructions.

Model	JL-712A3
Power supply	Rated voltage:12-24vdc Rated current: 12V/45 mA, 24V/30mA
Power consumption	12v/3.5 mA, 24v/3.5mA
Sensor type	Optic sensor & microwave motion
Dimming output	type:0-10v, accuracy: 2%, Drive current: 40 mA(typical)
Spectral Acquisition Range	350~1100nm, Peak wavelength 550nm
Turn on Illuminance	50 lx +/-10
Turn off Illuminance *1	Reflected light + 40Lux（±10）after each turn on Lower limit：50+40Lux（±10）； Upper limit：6000Lux（±100）
Reflected light compensation upper limit	6000 lx (+/-100)
initiate state adjustment	After power-on, the light will be turned on by default at 100% brightness and maintained for 5 seconds, then the light will be turned off automatically and enter the self-sensing operation mode *
Turn on delay	5s (The light will be turned on only when the ambient illuminance is satisfied for 5S continuously)
Turn-off delay	60s (Turn off the lights when the ambient illuminance is satisfied for 20S continuously)
Fixture illumination brightness change ratio: 0%~20%, 20%~100%	1s
Fixture illumination brightness change ratio: 100%~20%, X~0%	8s
100% lighting duration after its motion trigger	30s
Standby brightness (when the illuminance is satisfied but there is no moving object)	20%
Maximum hanging height	15 m
Sensing radius	4-8 m (by 15m hanging height)
Sensing angle	92 degrees
Flammability Level	UL94-V0
Mechanical Vibration	IEC60068-2-6
Operating Temperature	-40°C~55°C
Operating Humidity	5%RH~99%RH
–	–
IP rating	IP66
extra protection mode	built anti-trigger motion protection
Certificate	CE, fit zhaga book 18 interface

Note：
*1:
a). If the light-emitting surface of the lamp is completely shielded and isolated from the
light-sensitive surface of the light controller when installed, that is, no reflected light enters the light controller after the lamp is illuminated,then the light-off illuminance at this time is equal to the lower limit, that is, down The illuminance of the second turn off is approximately = the default turn on illuminance + 40 lux compensation value = 50 + 40 = 90 lux;

b). If the installation fails to completely shield and isolate the light-emitting surface of the lamp and the light-sensitive surface of the light controller, that is, the reflected light enters the light controller after the lamp is illuminated. If thelamp is lit to 100%, the current environment collected by the light controller
If the illuminance is 500lux, the illuminance of the next turn off is approximately = the current ambient illuminance+40=540lux;

c). If the power of the lamp is high and the light-emitting surface is very close to the light-sensitive surface of the light controller, the reflected light exceeds the upper limit of compensation after the lamp is turned on to 100%, that is, 54 the light controller detects that the ambient illuminance has been stable after turning
on the light If it is greater than 6000lux, the light controller will automatically turn off the light after 60S.

*available setting different start preset lux, in order to the ambient light level around.
* here our have various styles and multifuntionalies application, and core breakdown product type.
support Casambi Bluetooth mesh communication network:JL-712B2A2,
wireless linkage function JL-712G3L,
object motion by trigger and infrared remote control: JL-712A2H.

* you can choose different Smart controller series, and also you can choose the lamp luminaire module base type assemblies. such as JL-700, JL-700k3/k4, JL-710, JL-700W, JL-700L, etc.