Серия Zhaga – longjoin, фотоконтроллер shanghai long-join, производитель бренда LONG-JOIN

Главная > Серия LONG JOIN Zhaga

Бренд LONG-JOIN посвящен производителю серии Zhaga с 2019 года

В 2019 году компания LONG-JOIN приняла участие в международной организации консорциума zhaga, а наша продукция серии zhaga включена в редакцию zhaga book 18 1.0 Ed. Таким образом, вся наша продукция серии zhaga соответствует стандарту zhaga book 18. Кстати, что касается описания редакции Ed book 18 1.0, она также определяет механический и электрический интерфейс между светильником, между удлинительной розеткой и модулем удлинителя светильника или крышкой удлинителя светильника.

В настоящее время наша серия продукции zhaga включает в себя 2 категории видов, включая серию датчиков zhaga с беспроводным интеллектуальным автоматическим управлением и управлением с помощью датчиков освещенности, аксессуары zhaga для современного цифрового интерфейса связи светодиодных светильников и совместимость датчиков по принципу «plug-and-play».

Классификация аксессуаров Zhaga:
Крышка расширения Zhaga, JL-700-cap
Модуль расширения светильника, основание и крышка Zhaga серии 7XXJ
Удлинитель Lumaire, JL-700,JL-700X,JL-700W,JL-700L,JL-700S,JL-700T
Сертифицированный стандарт Zhaga-D4i, JL-721A1, JL-721A2, JL-721A3
Ссылка: www.zhagastandard.org

Серия Жага

>> Жага Гнездо

>> Датчик Жага

>> Аксессуар Жага

LONG-JOIN предоставляет ресурсы

>> Сертификат Жага

>> Каталоги серии Zhaga

>> Видео Жага

JL- 700 slot design (notch version) VS Standard JL-700

JL-700 new type notch zhaga socket, this is base on standard JL-700 minor improve craft. don’t wrong, new version socket is comply with book18 interface diameter 30mm, so this can be support with different zhaga controller diameter. such as 49.4mm, 50.4mm, 70.4mm and 80.7mm of base of lighting controller module. break down these socket details for you.

Параметр	Old Version JL-700W	New Version JL-700
Body Length	29.4 mm	29 mm
Gasket Thickness	2.5 mm	2.7 mm
Zhaga Cap Size	45.2 mm	45.2 mm
Nut Material	Цинк	Цинк
Thread Length	18.5 mm	20.6 – 21.6 mm
Wire Gauge	AWM 1015, 20 AWG, 6″ (120 mm)	AWM 1015 18/20/22 AWG, 105°C; AWM 1007 18/20/22 AWG, 80°C, 6 inch (approx. 152 mm)
Thread Type	M20×1.5 thread	M20×1.5 thread

JL- 700 Slot Design (notch version) VS Standard JL-700

The new version of the JL-700 groove design is better than the old version in terms of sealing, installation stability and cable adaptation. First of all, the connection is stronger (20.6-21.6mm) and it won’t come undone; secondly, the washer (2.7mm) is thicker and combined with the silicone washer it is much more waterproof, water won’t get in and electronic components will be safe; the new version also supports more wire gauges (18/20/22 AWG) and higher temperature grades of wire to improve adaptability and durability to meet the needs of complex outdoor environments. All these improvements make the whole lighting controller interface more stable and last longer, reduce the chance of failure caused by vibration, corrosion, etc., and make the product more reliable and easy to maintain.

JL-700 Nut is Optional

JL-700 zhaga socket is divide to body, cap, nut and gasket, its with choose from wire gauge, such as AWG18/20/22. In addition, this nut is made zinc or plastic material. for you select plastic hexagonal nut as attached to socket rear terminal fix firmware, here you must to add a mini securement ring refference JL-700W. right side to real show different shape structure fellow.

JL-700 Rear Terminal without wire or wire

Base JL-700 standard type zhaga socket, we can a few refined simple install solutions, such as Rear Terminal without wire JL-700W, JL-700W2 or JL-700 contain leads.

JL-700 zhaga socket with wire AWG 18/20/22, what’s more, if it used to height temperature environment, then conduct wires standard is to be ant-heat wire 105 Celsius.

JL-700 without wire type JL-700W or JL-700W2. this rear terminal hole is built-in buckle hook keep safe fix from loose and dropped this wire end. Note: this wire 20~22AWG，Strip the head 9 ~ 11mm and tin it

Zhaga Socket Series Post

Zhaga Socket Series Have Common Feature

Book18 interface diameter 30mm.
Thread pitch 1.5mm, diameter of the thread 20mm.
This socket with Rear terminal interface definition, 1-24VDC, 2-DALI–/GND, 3-DALI+, 4-General I/O.
Wire Gauge type,
AWM 1015,18/20/22 AWG,105°C
AWM 1007,18/20/22 AWG,80°C
Material, PBT and Add UV Stabilizer
This socket body color is option, here you choose from red, orange, yellow, and geen, etc.
Each one zhaga socket match a cap, diameter45.2mm.
Power consumption 1.5A Max, Rated voltage 24v.

Here list zhaga socket lineups, JL-700, JL-700W/W2, JL-710, JL-700K4/K5, JL-700T, JL-700S, JL-700T3N, JL-700L и JL-700 heat shrink tube, JL-700X(without protective cap),JL-770P3 , JL-700T3N7

Zhaga Socket Have Different Spot

1. Socket with rear terminal wire type are craft from material, like as electronic wires, cable, waterproof gland cable connector.

2. Zhaga body terminal measure size has a few difference, eg JL-700S 22.5mm, standard JL-700 and JL-700X length 29mm.

3. To ensure easy installation and stable dimming with steady current, we have made minor upgrades to the contact pins and reshaped them.

4. Some countries have regulations for wire / Zhaga socket colors to comply with local electrical standards, ensuring safety and easy component identification during installation and maintenance.

Zhaga Socket Switch to NEMA Type Receptacle Install Way

NEMA type receptacle

NEMA series receptacle standard install hole diameter size: 35-38cm, this also it rear terminal measure ranges. once you has a set perfect drill hole size for NEMA type, then you should do how find fit to new compact type JL-700 zhaga socket. Next steps go to find right thinking roadmap.

Book18 type socket

Due to nema type receptacle with rear terminal diameter 35-38mm, then you look find fit to zhaga socket size to replace it. however, JL-700 socket with un-regular shape and don’t standar measure this hole diameter, so this book18 with fix diameter 30mm, but nema type receptacle max outer-diameter 64.5mm. Compare outer-diameter between 30mm and 64.5mm, so this JL-700 socket is added a part plate with 64.5 mm, so this new type name JL-700K4/K5, or you can direct use JL-710 AC-DC Convert voltage type socket.

JL-700K4/K5, here lighting solution 1

For retrofit convention led light with NEMA hole diameter, and you is expected to redrill size, the same to keep good original led light fixture supplier relations, you should do make win-win decision matain multi-side balance and benefits each other. last, here dare you choose JL-700 zhaga socket can maximum your benefits and friendly deal with.

JL-700K4/K5

Here a few assemblies parts, such as zhaga socket, zhaga cap, and aluminum plate, silicone gasket and socket body.

* JL-700K4, JL-700K5
- К-пластина и шайба, обозначают длину между отверстиями.
-К4:49,2 мм, К5:51,8 мм

JL-710, here lighting solution 2

Here main reason why develop this type AC-DC convert JL-710 to reduce fit auxiliary power equipment cost and redrill hole diameter size of nema receptacle 35-38mm.

провода, длину можно настраивать.
wires gauge: power #18AWG/AWM1015, signal gauge #20AWG/AWM1015.
водонепроницаемая шайба.
Потребляемая мощность без нагрузки: <0,12 Вт
Диапазон входного номинального напряжения (макс.): 85-305 В переменного тока
Выходное напряжение постоянного тока: 24 В
Доступны комплекты розеток Zhaga и основания с куполом для достижения степени защиты IP66
Real input frequency range: 47~63Hz
Real rated voltage range: 100~277VAC

JL-710 wiring diagram

JL-710 zhaga socket with 0-10V dimming signal, and line and neutral, while signal wire has purple color and gray. there a dim + is purple is connect led driver (+), and from driver output (-) is connect JL-710 another dimming wire.

0-10v dimming signal wire zhaga socket can support zhaga sensor type fellow.

JL-701A 0/10V
JL-711A1/A2
JL-711B bluetooth network
JL-711N NB-Iot
JL-712A3 +microwave mode
JL-712G3L LTE+Cat1 object motion triggle with Linkage mode
JL-712B2A2 APP controller

JL-710 zhaga socket install diagram

As you see you know, this JL710 is compliant to NEMA install hole size. so this directly be place to mount on led street light with NEMEA type Base measures. right side picture just for you interpretation.

Zhaga Socket Series Video

JL-700W Leadless

Cable type zhaga socket

Quick-Connect JL-700 Zhaga Socket

Here help me go to Youtube to get more interest video of zhaga scoket series.

JL-700S Book18 zhaga socket

This is a short socket body type and Thread head measure size 13.1-15.1mm. while this with thread pitch 1.5mm, and diameter 20mm. so it is best use for led lighting fixture narrow space and you should to place dimming or other electronic devices.

JL-700s zhaga socket, below it is mande from a few parts.

zhaga cap
zhaga socket body
silicone gasket
zinc nut
wire,
AWM 1015,18/20/22 AWG,105°C
AWM 1007,18/20/22 AWG,80°C

Notes, if you need to zhaga socket with format stp, pls you every times and check reference, here leave contacts.

JL-700L Book18 zhaga socket

JL-700L zhaga socket rear terminal with cable, but cable is construct from four wire, the same JL-700 wire gauge.

Minior improve design this, you look down advices for you reference.

For you get better tightly rain, you should do make waterproof gland connector.
standard JL-700L socket rear terminal was un-sealed with silicone. further consideration about waterproof feature, so you can JL-700L heat shrink tube +silicone glue seal to this rear.
zhaga socket mount way has different, such as outside setting light fixture brackets support, upwards, downwards and sideways facing.

JL-700 series short thread head measures

Short thread head type zhaga socket, it is proposal for led light fixture cavity narrow space. in other words, it is perfect use smart cities led street light, while this can help led light pole deploy advanced sensor and dimming devices, and led driver module.

Short size type zhaga socket, here list different variants socket.

JL-700S
JL-700T Spring needle plate
JL-700T3N Flick-pin version
JL-700T3N7 Improve version

Примечания:

JL-700T3N for use in high bay light, and 3th location support signal output.
JL-700T3N7 for use in high bay light, and 3 and 4th location support signal output

Latest Zhaga Socket Series Video

JL-700W Leadless

Cable type zhaga socket

Quick-Connect JL-700 Zhaga Socket

Here help me go to Youtube to get more interest video of zhaga scoket series.

Недавний пост

5 Декабрь 2025

Why Professional Street Lighting Manufacturers Choose Tin-Plated Phosphor Bronze Terminals — The Engineering Logic Behind The JL-700W Zhaga Socket

Smart lighting depends on stable connections. That stability begins with one small part inside the socket: the terminal.
This is why the JL-700W Zhaga socket uses it. The material protects the connection, stabilises the signal, and ensures every smart controller works the way it should, year after year.

20 Ноября 2025

Эволюция и итерационные улучшения разъемов Zhaga JL-700 с длинным соединением

Серия JL-700 демонстрирует, как тщательно продуманная конструкция, небольшие улучшения и отзывы реальных установщиков могут превратить простую розетку в высокопроизводительное решение для уличного освещения. Каждая версия отвечает всем требованиям профессионалов: от устранения складок на прокладках до экстремальных требований к водонепроницаемости.
Whether the project is a quiet residential road or a windy coastal bridge with photocell LED street light controllers, the JL-700 family has a version that fits the job. This is why Long-Join’s Zhaga sockets continue to support reliable smart-lighting systems around the world.

24 Сентября 2025

Системы управления освещением Zhaga и NEMA: сравнительный анализ стандартов проводки и розеток

Zhaga и NEMA играют важнейшую роль в современных системах освещения. Компактный размер и продуманная конструкция Zhaga делают его идеальным решением для умных городов будущего, а NEMA обеспечивает проверенную временем надежность для современной инфраструктуры. Выбор правильной розетки зависит от области применения, окружающей среды и будущей адаптации. Пусть ваше решение об управлении освещением будет зависеть от долгосрочных целей, технических потребностей и совместимости с экосистемой.

FAQ About Zhaga Series

1. What is the recommended torque range for the JL-700 plastic hexagonal nuts?

Here advise you use 2.5-3N.m

2. For the JL-700 socket, if only two wires are needed (ports 2 and 3), and ports 1 and 4 are left unconnected, can the outlets still be sealed with glue?

You can apply glue, but you need to make a special back cover and then seal ports 2 and 4. Note: No contact plates or wires should be installed on pins 1 and 4.

3. What is the material of the internal wiring terminals of the JL-700W?

Phosphor bronze tin- plating

4. For Zhaga controllers, has our factory conducted salt spray testing?

The controller housing is made of plastic and has not undergone salt spray testing. Testing can be arranged if needed.

5. Is provide zhaga baseplate with stoma for you?

okay, here new product zhaga baseplate with stoma, and once you nee to want it, here can send you email.

6. Do they have NEMA Socket Power Taps, how many pins do they support, 3 power pins or DALI as well?

Here recommend JL-250T, and power pins can be connected 3/4/5 pin. 7 pin JL-250P (2,3,45)

7. Tenerally, JL701j base color is gray, then is its color can place to another color?

this color can change to another, but have a limitment when you order, you should purchase quantities at least 3000-5000.

Свяжитесь с нами

Добро пожаловать в Long-Join.com! Ищете эксперта в области освещения? мы ответим в течение 24 часов. Изучите наш ассортимент и сообщите нам о своих интересах для быстрой помощи.

Связаться с нами

Позвоните нам сейчас!

Бренд LONG-JOIN посвящен производителю серии Zhaga с 2019 года

Серия Жага

More about Zhaga Socket Question

JL- 700 slot design (notch version) VS Standard JL-700