NEMA / ANSI Standard Photocontrol Receptacle

NEMA / ANSI Series Product

JL-207C ANSI C136.10-2017

JL-205C ANSI C136.10

JL-208 Shorting cap to replace photocell

JL-240XA ANSI C136.41

Pin Interface

The ANSI C136.10 standard covers the performance and testing requirements of optical controllers and forms the basis of the reliability and safety specifications for optical control equipment.

The ANSI C136.41 standard focuses on the electrical and mechanical interfaces of optical control sockets, particularly 7-pin sockets, to ensure that equipment from different brands is compatible and interchangeable.

The ANSI C136.24 standard defines the electrical and mechanical interchangeability of non-locking (button type) light controllers. These controllers are designed for use in road and regional lighting systems, ensuring that light control devices can be easily replaced and integrated into different control systems.

NEMA & ANSI Relation

The American National Standards Institute (ANSI) plays a guiding and approving role in the development of National Electrical Manufacturers Association (NEMA) standards. ANSI is responsible for formulating and endorsing national standards to ensure their scientific and authoritative nature. As an electrical manufacturing industry association, NEMA will refer to and follow the relevant ANSI standards to formulate specific interface, electrical and mechanical performance specifications.

In the field of optical controllers, for example, NEMA’s standards (covering the mechanical and electrical specifications of optical controllers, for instance) strictly adhere to the C136 series standards issued by ANSI (including ANSI C136.10 and ANSI C136.41), ensuring the safety, consistent performance and interchangeability of equipment.

NEMA-ANSI

Twist lock photo control

These lighting sensing device are support Support Mexico Municipal lighting Projects. additionally, JL-205C or JL-207C is local zone firstly important tender document ditional guide, while a moment, also require match type light fixture base module interface, such as JL-200X, JL-240XA, JL-208.

JL-205C, JL-207C Fotocontrol Feature

Optional IP65, IP54.
Optional work voltage ranges: 120-277VAC
Surge Arester, 110J/3500A, 235J/5000A and 460J/10000A, etc.
Fail-on / Fail-off
load power Maximum:1800W

These lighting controllers are ideal for a variety of applications, including garden, courtyard, and pathway lighting. They also serve as an excellent solution for upgrading older, high-consumption lighting systems, helping to achieve energy efficiency and sustainability goals.

NEMA 7 PIN receptacle-JL-240Xa

JL-240XA is a standard interface for connecting lamps and external control modules. This interface conforms to the NEM/ANSI C136.41 standard and also conforms to the product base connectors commonly used in North America.

NEMA JL-240XA Receptacle Key Features:

1-The main body of the receptacle is PBT, and UV stabilizer is added to ensure its durability and UV resistance.

2-Removable gasket.
Especially when installing lamps, it can fit the surface of the lamps seamlessly, further enhance the waterproof function, and prevent external raindrops from entering the interior of the lamps and causing damage.

3-Dimming wire
The 7-pin receptacle can provide different dimming wires. How to choose the receptacle with dimming wire? This stipulates the selection of wires. You can choose 0-10V or dali for dimming wire according to the type of dimming light control. If we have selected the dimming controller, then choose the dimming interface between one end of the receptacle dimming wire and the other end of the lamp driver.

4-High load capacity
Supports up to 15A power load and 0.25A signal load, providing reliable power and signal connection.

5-Wide voltage range
Applicable to the voltage range of 0-480VAC, which can meet application scenarios with different voltage requirements.

NEMA 7 PIN wiring Photocell Recetpacle

NEMA 7 receptacle firstly for Top Advanced Controller

Our lighting control receptacle not only supports standard lighting controllers (automatically turning on at night and off during the day), but also meets the application of smart city lighting projects. At the same time, the construction of municipal smart city lighting street lights requires access to wireless networks for remote control, and can achieve comprehensive lighting solutions such as remote dimming, automatic detection of environmental changes to adjust brightness, etc. The key point is to develop a lighting controller that can access the local network and receive communication modules to achieve advanced functions such as environmental monitoring and remote control.

NEMA / ANSI Series -New Type Recetpacle

ANSI JL-260C cable wire version 7 pin receptacle, Rotate type

ANSI JL-260D2 Type a Split Structure, rotate type

this mode show wall mount type JL-260C& brackets

NEMA Controller Accessories

Lighting controller cover, available provide different tall sizes 56 mm, 76 mm, and 98 mm, here color such as Translucent, grey translucent cover. and cover heigh size:56 mm, 76 mm, and 98 mm.

JL-241J controller 7 pin base, this base diameter with 76.6±0.3mm, and 4 spring leaf signal contact dots (0-10v and Dali dimming). on the development of high functionality aspects, JL-241J base is available to support multi control unit assemblies.

The NEMA 7 PIN receptacle is a robust connector part, and also is connected between the luminaire and high functionality controller. and this 7 pin receptacle has an applicable voltage rangs 0-480V, and compatiable with different standard certificates UL and ANSI C136 41-2013.

Core part [controller unit] this electronic unit integrated multi-functionalities and various sensor. Furthermore, To make sure this core part keep safe and works from potential risk.Then you make sure that you are looking for a good quality lighting quality supplier, and they deliver the sample while it does not meet the standard before the procedure. therefore, you can choose well know brand supplier as your compatner. eg long-join, TE, leaditop and other lighting suppliers.

Valuable application

If you want to develop advanced technological functionalities for lighting controller, like as monitoring environment condition,monitoring traffic conditions, alarm sensing, and pre-alarm systme to monitoring lighg work status. Then you can consider many different factor while this lighting supplier is not worthy to cooperate?

1-long-join brand quality suppliers can as long-term cooperation partner. due to we has been manufancturing lighting controller since 1996 yeas.

2-NEMA 7 PIN receptacles are not only suitable for simple on/off control, but also support advanced functions such as dimming and sensor access, which is suitable for the needs of modern smart city construction.

3-base on our NEMA 7 PIN receptcle can deployed different type lighting control, and smart lighting controler. in a word, If you want to use it to develop wireless communication network node controller, long-jong brand ANSIC136.41 7 pin controller base will bring universal interface.

4-7 pin contacts on the receptacle surface, and there are 3 pin designs for supply standard electrical system interface, and other supplies 4 contacts assigned for 0-10V dimming and DAli dimming to prepare for future pre-add digitalism service lighting controller functionalities.

5-base &cover, base with 7 pin or 3 pin, and pin contacts comply with the ANSI C136.41 standard, so they can be loaded by the various lighting controllers. learn more link to here.

Reccommend Series Product

JL-205C Available support design for low voltage light sensor switch. eg 12V,24V

JL-207 series photo sensor switch
with electric current 10A or hi-power 20A

JL-208 photocell shorting cap with IP54, IP66, while IP66 type top dome as like flown cure shape structure appearance.

JL-200z with rear cover, and option bracket and its different material. here key parameter Max 480V, AWG#14 15Amp.

YS800076 photocell black cover, and option height

The new JL-242JV Photocell Base, featuring a waterproof, breathable film design developed over three years of intensive R&D for superior lighting control performance.

Twist lock photocontrol Feature

JL-207 c photocontrol test

JL-205 vsJL-207 photocontrol

nema photocontrol wiring

その Street Light Twist Lock Photocontrol Kit Series provide an economically advantageous yet resilient solution for street lighting applications. This product series comprises two primary components: a robust twist lock photo controller and an ANSI C136.10 3-pin receptacle JL-200x. When mounted on street lights, these components facilitate automatic on/off control, ensuring efficient operation and energy conservation.

Key Parameter Definition

Product Model: JL-205C
Rated Voltage: 110-277 VAC
IP Rating: IP54, IP65, IP67
Compliant Standard: CE, ROHS, UL

Product Model: JL-207C
Rated Voltage: 110-277 VAC
IP Rating: IP54, IP65, IP67
Compliant Standard: CE, ROHS, UL

フォトセル短絡キャップ

here our shorting cap JL-208 to keep light fixture lighting stay-on, so it’s work mode as like Fail on.

Key Parameter Definition

ANSI C136.10 base 3 pin
Rated Voltage: 0-480VAC
Surge Protection: JL-208-15; JL-208-23
Compliant Standard: CE, ROHS, UL

how shorting cap work?

JL-208 shorting cap test

All-round Display

LONG-JOINプロファイルについて

龍之智能は照明業界で20年以上の実績を誇り、照明アクセサリー（調光スイッチ）の設計、開発、製造を専門としています。道路照明および地域照明の調光製品およびシステムの研究開発、製造、販売を一体的に行う合資会社です。

Long-join Light Controller Manufacturers to offer a wide range of street light controllers, NEMA 7pin, 3pin, 5pin receptacles and cover bases, and zhaga standard receptacles, covers and bases.

Our production workshop complies with international management standards: ISO9001:2005, and the factory’s production workshop is capable of producing NEMA series products and zhaga series products. The production line workshop has 3 important work areas, with a total of 250 lovely people who are responsible for producing NEMA receptacles, electronic type twist lock light control production, bimetallic type light control, zhaga sockets and zhaga light control.

製品認証: UL、Cul、CB、ANSI C136.41、FCC、CE など。