here this video to reveal 230x receptacle how to install light fixture. below order step by step to illustration.

1st prepare something  jl-230x-14 receptacle (wire color:black, white, red), an twist lock photocell, and should be prepared normal work on led light fixture.

2st wiring black, Connect the black wire to the power wire (live wire). white, Connect the white wire to both the neutral wire and the load (led light fixture) output wire. This common connection serves as a point of return for both the load and the neutral wire. Red: Connect the red wire to the load (usually a street lamp or other lighting fixture).

3st check wiring in is not right Once the wiring is complete, we need to double-check that all connections are secure and correct. Make sure there are no exposed wires and that all connection points are properly insulated.

4st install photocell 4.1 Align the 3-pin twist-lock light controllers of different lengths with the 3-pin receptacle. Make sure the pins of the light controllers are aligned perfectly with the holes of the receptacle. 4.2 Insert the twist-lock light controller into the 3-pin receptacle and turn it clockwise until it locks completely into place.

5st check If the light controller is locked in the receptacle, it cannot be loose. We can confirm that it is fixed firmly in place by gently pulling the light controller left and right.