カテゴリー: 関連ビデオ

フォトセル製品 / 回転ツイストロック7ピンソケット JL-250T / LONG-JOIN® フォトセルメーカー

The JL-250T series light control sockets are designed for lamps that require twist-lock light control installations that comply with ANSI C136.10-2006 standards. The series also complies with the newly released ANSI C136.41-2013 standard, allowing for multiple controls of LED lights through sockets. The JL-250T offers 2 or 4 gold-plated low-voltage pads on the top surface to accommodate optoelectronic controls with spring contacts compliant with ANSI C136.41, and a male quick connector on the rear for signal connections. In addition, this series features a 360-degree rotation limiter that complies with ANSI C136.10 standards.

Quality Show 45s! 120 Volt Stem Mount Photocontrol Switch

JL-118A  switch is suitable for LED lighting devices such as outdoor street lights, corridor lights, and garden lights. It can automatically turn off when the environment becomes brighter at sunrise, and automatically light up when the environment becomes darker at sunset.

絶妙な品質！回転式フォトセルライトスイッチセンサー 120V

JL-118AV is a normally open optical thermal delay light-controlled switch with a delay time of 30-120 seconds and is made of waterproof polycarbonate (PC) shell material.Standard accessories include rubber washers and zinc alloy nuts + threaded pipes.

Demo Product-NEMA 7 PIN Wiring Photocell Receptacle

7 Pin socket has 2-4 gold-plated contact pieces on the surface, and provides low-voltage signal line access on the back. The accessories include a rubber gasket, which is compliant with light controllers with ANSI C136.41 interface. The main body material is PBT phenolic resin, and the regular length of the line is 15cm (can be customized).The base has a ten-year warranty and has CE, RoHS, and cRUus/RU certifications.

7 PIN NEMA Wiring Photocell Socket

The JL-240 7 Pin socket is designed for use with intelligent lighting controllers and can be adjusted to fit various outdoor LED lights such as street lights, corridor lights, and courtyard lights. Constructed with durable PBT phenolic resin, it ensures reliability in diverse environments. The standard wire length is 15cm but can be customized according to requirements.

NEMA 5ピンツイストロックフォトコントロールレセプタクル

Long-join has more than 20 years of experience in the field of lighting controllers, producing products that comply with international standards IP54, IP65, IP66 and IP67. With the strength of our technical team and 38,000 square meters of factory, we are able to meet various needs.

ロングジョイント「Zhaga」製品リリース Zhagaソケット

現在、当社の Zhaga シリーズ製品には、ワイヤレス スマート自動制御と光感知制御を備えた Zhaga センサー シリーズ、LED 照明器具の最新デジタル通信インターフェース用の Zhaga アクセサリ、およびセンサーのプラグ アンド プレイ相互運用性の 2 種類のカテゴリがあります。

フォトセル配線/フォトセルの取り付け方法？フォトセルJL-205C&JL-200Zの取り付け例

It is suitable for LED lighting control components such as outdoor street lights, corridor lights, garden lights, etc., to realize that the surrounding environment is bright and extinguished at sunrise, and the surrounding environment is dark and light up at sunset.

Install Photocell Sensor on the Luminaire

The light controller needs to work with the socket to control the light fixture.First, align the socket with the fixture and install it into the appropriate screw hole position.Internal connection: Connect the live wire (red) of the socket to the live wire of the driver, and the neutral wire (white) to the neutral wire of the driver.Simulate the mains power supply: Connect the white neutral wire of the power supply to the neutral wire of the light controller, and connect the live wire to the live wire (input) of the light controller.Finally, insert the twist-lock light controller into the socket to complete the installation process.

Photocell Shorting Cap JL-208 Product Testing—Photocell Manufacturer

The JL-208 short-circuit cap is a black semi transparent circular product made of PC (polycarbonate) material that is UV resistant and IP54/IP66 waterproof. It has a sturdy structure and waterproof adhesive seal, ensuring a high level of rain protection when installed on the lamp. Suitable for replacing outdoor street lights, corridor lights, front door lights, and other lighting LED street lights that are aging, have reached the end of their service life, or are damaged due to lightning strikes or abnormally high power supply voltage causing damage to the street light controller.